If you have received a replacement SD card or re-imaged your current SD card, you will need to set up your Sisyphus with the correct settings to match your particular Sisyphus product.
- Replace your old SD card with the new or re-imaged one.
- Plug in your Sisyphus and wait for the lights to turn on (about 60 seconds)
- Connect to your Sisyphus through the Sisyhpus App
- Make sure your phone/tablet has wifi and bluetooth enabled, then open the Sisyphus app. Wait for the app to connect to your Sisyphus. If your device cannot find your Sisyphus, open your wifi settings and connect to the “Sisyphus” wifi network. Restart the Sisyphus app and try again.
- Once connected, you will be instructed to select the proper settings for your particular Sisyphus (see below)
- Wait for your Sisyphus to restart (about 60 seconds)
Screen 1:
- Here you will pick which shape of table you currently own.
Screen 2:
- Once you pick the shape, you will pick the type.
Screen 3:
Depending on your type, you have an additional question regarding the model.
Screen 4:
Be sure to look at your table at this time. The lights will correspond to the options on the screen.
Screen 5:
At the end, you can restart if you made a mistake or continue.
If you are still experiencing issues with your Sisyphus, please contact customer support