Your Sisyphus may be able to operate with 2-balls simultaneously.
There are 2 tracks in your track library that you use to enable and disable 2-ball mode.
Run the "Attach" track to pick up the secondary (Tantalus) ball from the ballpark and use the "Detach" track to park it again. Most abstract and algorithmic tracks work well in 2-ball mode while any representative art, like a drawing of a face or text, will not look correct in 2-ball mode. Of course, there is no harm in experimenting.
You can place these 2 tracks in playlists just like other tracks to automate the process.
To ensure that both the main ball and secondary ball are in the correct positions, Follow this process.
- Unplug the table.
- Remove the glass from your table.
- Place the main ball at the center of the table.
- Place the secondary ball in the ballpark as illustrated below.
- Plug the table back in.
- After the table runs the homing sequence, it will run “Detach” and the table should be in one-ball mode until the “Attach” track is run.