A factory reset should only be used if Sisyphus is not working at all (i.e. the lights do not turn on and the ball does not move). It should only be used as a last resort and will wipe all downloaded data from your Sisyphus. If you have backups enabled, you can restore from backup to reclaim your downloaded tracks.
Please talk to support if you are having trouble with your table.
Manual Factory Reset
(This feature is available for all Sisyphus products sold with RGBW Lights and any product sold after 2021. If you have a white light-only table purchased in 2021 or older, please contact customer support)
- Identify the Reset Button on the underside of your Sisyphus. The Reset Button can be reached through a hole in the plastic Bottom Cover that protects the underside of your Sisyphus (see diagram). If your Sisyphus does not have a bottom cover, the reset button can be found on the green board attached to the mechanism on the underside of your Sisyphus (see image at the bottom of this article). If your Sisyphus has a bottom cover with no access hole, you will need to remove it to access the reset button.
- Using a small, blunt object such as a pen cap or pencil eraser, depress and hold the Reset Button for 15 seconds until the LED immediately beside the reset button blinks red, then release the button
- Allow ample time for your Sisyphus to reset. Do not unplug from power. Once the Sisyphus has restarted, connect your mobile device to the Sisyphus network and open the Sisyphus app.
- Connect the Sisyphus to your network and immediately update the firmware on Sisyphus. Be patient; updates can take up to 30 min to complete depending on your internet connection at software age. Do not attempt to unplug or power-cycle your Sisyphus during the update.
- After the update, your Sisyphus should be good to go!
If you are still experiencing issues with your Sisyphus, please contact customer support
Hardwood Tables
Mini EX
Metal Xyla
Carved Hardwood Xyla
If you are still experiencing issues with your Sisyphus or have a pre 2021 table, please contact customer support